Filter
Top Products
Chapter 2 Installing the Sun Fire X4150 Server Into a Rack with Slide-Rails 21
Installing the Cable Management Arm
Use this procedure to install an optional cable management arm (CMA). FIGURE 2-7
shows the CMA.
FIGURE 2-7 Cable Management Arm (CMA)
1. Unpack the cable management arm parts.
2. Take the CMA to the back of the equipment rack and ensure that you have
adequate room to work around the back of the server.
Note – References to “left” or “right” in this procedure assume that you are facing
the back of the equipment rack.
3. Remove tape to separate parts.
The CMA rail extension might be taped to the CMA arm.
4. Attach the CMA rail extension into the left slide-rail until the extension locks into
place with an audible click. (See FIGURE 2-8.)
FIGURE 2-8 Inserting the CMA Rail Extension Into the Back of the Left Slide-Rail
CMA rail
extension