Filter
Top Products
56 Sun Fire X4150 Installation Guide • January 2008
Delivery Methods
By default, video output for the Windows preinstall is directed to the VGA monitor.
If no VGA monitor is attached, use a RKVM session to configure the OS.
How to start a RKVM Session
For more detailed information on starting a RKVM session (Remote Console
session), refer to the section "Starting the Remote Console Application"intheEmbedded
Lights out Manager Guide for the Sun Fire X4150 and X4450 Servers.
Note – If a VGA monitor is attached, skip this section
1. Determine the Service Processor IP address.
Refer to the section Determining the Embedded LOM Service Processor IP Address.
2. Open a browser window.
3. Type the IP address of Service Processor into a browser window, and then
login to the WEBGUI.
4. Click on the Remote Control tab, and then select Redirection.
5. Click Launch.
The console displays.
Configuring the Windows Server 2003
R2 OS
To configure the preinstalled Windows Server 2003 R2 Operating System:
1. Boot the pre-installation image for the first time.