Filter
Top Products
7-18
SUPERSERVER 1018D-73MTF User's Manual
Onboard LAN1/LAN2 Option ROM
Select iSCSI to use the iSCSI Option ROM to boot the computer using an iSCSI
device installed in a LAN port specifi ed. Select PXE (Preboot Execution Environ-
ment) to boot the computer using a PXE device installed in a LAN port specifi ed.
Select Disabled to prevent system boot using a device installed in a LAN port to
boot the system. The options for Onboard LAN1 Option ROM are Disabled, PXE
and iSCSI. The options Onboard for LAN2 Option ROM are PXE and Disabled.
Onboard SAS Option ROM
Select Enabled to boot the computer using a SAS device installed in the system.
The options for SAS Onboard Option ROM are Disabled and Enabled.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unifi ed
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled.
ACPI Settings
High Precision Event Timer
Select Enabled to activate the High Performance Event Timer (HPET) that produces
periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in
synchronizing multimedia streams, providing smooth playback and reducing the de-
pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc-
tion embedded in the CPU. The High Performance Event Timer is used to replace
the 8254 Programmable Interval Timer. The options are Enabled and Disabled.
ACPI Sleep State
This feature selects the ACPI Sleep State that the system will enter into when
the suspend button is activated. The options are Suspend Disabled, and S3 only
(suspend to RAM).
WHEA Support
This feature Enables the Windows Hardware Error Architecture (WHEA) support for
the Windows 2008 (or a later vision) operating system. The options are Enabled
and Disabled.