Filter
Top Products
5-4
SUPERSERVER 1018D-73MTF User's Manual
1. Remove power from the system and unplug the AC power cord from the
power supply.
2. Do not apply any thermal grease to the heatsink or the CPU die; the required
amount has already been applied.
3. Place the heatsink on top of the CPU so that the four mounting holes are
aligned with those on the (preinstalled) heatsink retention mechanism.
4. Screw in two diagonal screws (i.e. the #1 and the #2 screws) until just snug.
Do not fully tighten the screws or you may damage the CPU.)
5. Add the two remaining screws then fi nish the installation by fully tightening all
four screws.
Installing a CPU Heatsink
Figure 5-1. Installing/Removing the Heatsink
Screw #1
Motherboard
Loosen screws in the
sequence shown
Screw #2
Screw #3
Screw #4