Filter
Top Products
4-4
X7DBU/X7DGU User's Manual
Type
Selects the type of IDE hard drive. The option Auto will allow the BIOS to
automatically confi gure the parameters of the HDD installed at the connection.
Enter a number between 1 to 39 to select a predetermined HDD type. Select
User to allow the user to enter the parameters of the HDD installed. Select
CDROM if a CDROM drive is installed. Select ATAPI if a removable disk drive
is installed.
Multi-Sector Transfers
This item allows the user to specify the number of sectors per block to be used
in multi-sector transfer. The options are Disabled, 4 Sectors, 8 Sectors, and
16 Sectors.
LBA Mode Control
This item determines whether the Phoenix BIOS will access the IDE Channel 0
Master Device via the LBA mode. The options are Enabled and Disabled.
32 Bit I/O
This option allows the user to enable or disable the function of 32-bit data transfer.
The options are Enabled and Disabled.
Transfer Mode
This option allows the user to set the transfer mode. The options are Standard,
Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4, FPIO3/DMA1 and FPIO4/DMA2.
Ultra DMA Mode
This option allows the user to select Ultra DMA Mode. The options are Disabled,
Mode 0, Mode 1, Mode 2, Mode 3, Mode 4, and Mode 5.
Parallel ATA
This setting allows the user to enable or disable the function of Parallel ATA. The
options are Enabled and Disabled.
Serial ATA
This setting allows the user to enable or disable the function of Serial ATA. The
options are Disabled and Enabled.
Native Mode Operation (Available when the item-SATA Controller
Mode Operation indicated is set to Compatible.)
Select the native mode for the HDD drives. The options are: Serial ATA,
and Auto.
SATA Controller Mode
Select Compatible to allow the SATA and PATA drives to be automatically-detected