Filter
Top Products
DS 3408 Product Reference Guide13-56
Code 128 Emulation
Parameter # 7Bh
When this parameter is enabled, the scanner transmits data from certain MicroPDF417 symbols as if it was encoded in Code 128
symbols. Transmit AIM Symbology Identifiers must be enabled for this parameter to work.
If Code 128 Emulation is enabled, these MicroPDF417 symbols are transmitted with one of the following prefixes:
]C1 if the first codeword is 903-907, 912, 914, 915
]C2 if the first codeword is 908 or 909
]C0 if the first codeword is 910 or 911
If disabled, they are transmitted with one of the following prefixes:
]L3 if the first codeword is 903-907, 912, 914, 915
]L4 if the first codeword is 908 or 909
]L5 if the first codeword is 910 or 911
Scan a bar code below to enable or disable Code 128 Emulation.
Enable Code 128 Emulation
(01h)
*Disable Code 128 Emulation
(00h)