Filter
Top Products
DS 3408 Product Reference Guide6-4
3. Connect the round male DIN host connector of the Y-cable to the keyboard port on the host device.
4. Connect the round female DIN keyboard connector of the Y-cable to the keyboard connector.
5. If needed, attach the optional power supply to the connector in the middle of the Y-cable.
6. Ensure that all connections are secure.
7. Turn on the host system.
8. Select the Keyboard Wedge host type by scanning the appropriate bar code from Keyboard Wedge Host Types on page 6-5.
9. To modify any other parameter options, scan the appropriate bar codes in this chapter.
Keyboard Wedge Parameter Defaults
Table 6-1 lists the defaults for Keyboard Wedge host parameters. To change any option, scan the appropriate bar code(s) in the
Keyboard Wedge Host Parameters section beginning on page 6-5.
See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 6-1. Keyboard Wedge Host Default Table
Parameter Default Page Number
Keyboard Wedge Host Parameters
Keyboard Wedge Host Type IBM PC/AT& IBM PC Compatibles 6-5
Country Types (Country Codes) North American 6-6
Ignore Unknown Characters Transmit 6-8
Keystroke Delay No Delay 6-8
Intra-Keystroke Delay Disable 6-9
Alternate Numeric Keypad Emulation Disable 6-9
Caps Lock On Disable 6-10
Caps Lock Override Disable 6-10
Convert Wedge Data No Convert 6-11
Function Key Mapping Disable 6-11
FN1 Substitution Disable 6-12
Send and Make Break Send 6-12
Note