Filter
Top Products
DS 3408 Product Reference Guide15-30
Setup Field(s)
Send Data (continued)
Send Next 19 Characters
Send Next 20 Characters
Table 15-1. Setup Field(s) Definitions
Parameter Description Page
Move Cursor
Move Cursor To a Character
Scan the Move Cursor To Character bar code on page 15-31,
then any printable ASCII character from the Alphanumeric
Keyboard. When this is used, the cursor moves to the position
after the matching character. If the character is not there, the rule
fails and ADF tries the next rule.
15-31
Move Cursor to Start of Data Scan this bar code to move cursor to the beginning of the data. 15-31
Move Cursor Past a Character
This parameter moves the cursor past all sequential occurrences
of a selected character. For example, if the selected character is
‘A’, then the cursor moves past ‘A’, ‘AA’, ‘AAA’, etc. Scan the
Move Cursor Past Character bar code on page 15-31, then
select a character from the Alphanumeric Keyboard. If the
character is not there, the cursor does not move (i.e., has no
effect).
15-31
Skip Ahead “N” Characters
Scan one of these bar codes to select the number of positions
ahead to move the cursor.
15-32
Skip Back “N” Characters
Scan one of these bar codes to select the number of positions
back to move the cursor.
15-33
Send Preset Value
Send Values 1 through 6 by scanning the appropriate bar code.
These values must be set using the prefix/suffix values in Table
7-4 on page 7-21.
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
15-35