Filter
Top Products
Symbologies 12-13
UPC/EAN/JAN Supplemental Redundancy
With Autodiscriminate UPC/EAN/JAN Supplementals or one of the supplemental modes selected, this option adjusts the
number of times a symbol without supplementals is decoded before transmission. The range is from 2 to 22 times. Five or above is
recommended when decoding a mix of UPC/EAN symbols with and without supplementals, and the autodiscriminate option is
selected. The default is set at 7.
Scan the bar code below to set a decode redundancy value. Next, scan two numeric bar codes in Appendix D, Numeric Bar Codes.
Single digit numbers must have a leading zero. To correct an error or change a selection, scan Cancel on page D-4.
Transmit UPC-A Check Digit
The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code below to
transmit the bar code data with or without the UPC-A check digit. It is always verified to guarantee the integrity of the data.
Transmit UPC-E Check Digit
The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code below to
transmit the bar code data with or without the UPC-E check digit. It is always verified to guarantee the integrity of the data.
UPC/EAN/JAN Supplemental Redundancy
*Transmit UPC-A Check Digit
Do Not Transmit UPC-A Check Digit
*Transmit UPC-E Check Digit
Do Not Transmit UPC-E Check Digit