Symbol Technologies LS 1000 Barcode Reader User Manual


 
1-5
LS 1000 Product Reference Guide: Chapter 1, Introduction and Setup
Connecting to a Host
With some terminal types, the LS 100x is unable to answer host terminal polls until the
appropriate host type is selected. This may result in an error message generated by the
host. To correct this situation, select proper parameter values and initialize the host
terminal. See Chapter 4 for more information.
RS-232C
For external power operation with Synapse “Smart Cable”
Plug the scanner into the Synapse “Smart Cable”.
Connect the Synapse cable with the host connector.
Connect the power supply to the input receptacle located on the Synapse cable.
Figure 1-1. RS-232C External Power Connection using Synapse Cable
coverBook Page 5 Monday, December 1, 1997 2:19 PM