Filter
Top Products
4-10
LS 1000 Product Reference Guide: Chapter 4, Programming the LS 1004
Decode Attempt Time (cont’d)
Operating Mode
This parameter determines whether or not power remains on after a decode attempt.
The LOW POWER option provides for power-down after each scan attempt, while the
CONTINUOUS option provides for power to remain on after each scan attempt.
Aggressive Scan Mode
This parameter is available in the continuous operation mode only. When you set this
parameter to be enabled, the scanner scans the mirror continuously, even if it does not
illuminate the laser diode.
7.0 seconds
6.5 seconds
Continuous
Low Power
Aggressive Scan
Enable
Aggressive Scan
Disable
coverBook Page 10 Monday, December 1, 1997 2:19 PM