Symbol Technologies LS 1000 Barcode Reader User Manual


 
1-3
LS 1000 Product Reference Guide: Chapter 1, Introduction and Setup
Set-Up
Unpacking
Remove the scanner from its packing and inspect it for damage. If the scanner was
damaged in transit, call the
Symbol Support Center
at one of the telephone numbers
listed in the front of this manual. KEEP THE PACKING. It is the approved shipping
container and should be used if you ever need to return your equipment for servicing.
Installing the Cable
1. Insert the cable into the receptable on the bottom of the scanner, as shown below:
coverBook Page 3 Monday, December 1, 1997 2:19 PM