Filter
Top Products
1-3
Introduction
The PDT 1100-IR protocol is a PDT 1100 terminal’s format for transmitting data between
the PDT 1100 and the host computer. For details, refer to the PDT 1100 Product Reference
Guide.
Computers Available for IR-Transfer Utility C DLL
IR-Transfer Utility C DLL can run on personal computers equipped with the Intel 80386 CPU
or higher capability that can operate Microsoft Windows 95 or Microsoft Windows NT3.51/
4.0.
The DLL needs more memory than required by the OS and at least 200 kilobytes of unused
disk space.
Note: IR-Transfer Utility C DLL cannot run with Windows 3.1.
When using PC’s that use commands or menus to control the power
source for the integrated RS-232C interface to save power, create a
setting for applying power to that interface.
Installing IR-Transfer Utility C and E DLL
Preparations for Using IR-Transfer Utility C DLL
Copy the DLL file(s) to use into the folder where application program(s) are stored or into
the folder with the path to the application folder.
IR Devices Available for IR-Transfer Utility E DLL
Listed below are IR devices (e.g., external IR transceivers and IR port-integrated computers)
that IR-Transfer Utility E DLL supports.