Filter
Top Products
A-2
PDT 1100 Terminal DLL Guide
53 Communications error.
The NAK sending counter has counted up to 10.
54 Communications error.
The NAK receiving counter has counted up to 10.
55 Communications error.
The sending station receives as EOT in response to the sent text.
60 The DLL has been running in sending operation.
61 The DLL has been running in receiving operation.
70 The receiving heading text contains any of the following:
(1) File name in wrong format
(2) More than 32767 records
(3) Number of fields out of range from 1 to 16 in the data file
(4) Data field length out of range from 1 to 254 digits in the data file
(5) Total length of all data fields plus the number of the fields exceeding 255 bytes
71 The designated directory path has not been found.
72 The disk memory is full.
74 The designated timers have been occupied by other applications.
75 The designated RS-232C communications port (COMx:) has been occupied by other
applications.
76 In a file there is a record whose length is less than or more than the specified record
length.
77 The Utility has received a file not designated, instead of the designated file.
80 Ir-Transfer Utility C DLL has failed to initialize the IR device.
81 The correct DLL is not found.
82 The IR device does not support the designated transmission speed.
90 Ir-Transfer Utility C DLL was aborted by clicking the Abort button in the PDT 1100-Ir
Sending (or Receiving) dialog box.
99 Any other error has occurred.
Table 1-1. Error Codes (Continued)
Code Description