Filter
Top Products
2-6
PDT 1100 Terminal DLL Guide
To handle CR-LF codes as data, specify the +C option. CR-LF codes in records are
transmitted as data:
When downloaded:
Even if you specify the +C option, use CR-LF codes as a record separator. If a record’s length
is more or less than the specified record length in a file, an error (error code 76) occurs and
the transmission is aborted. For the +C option, refer to Options on page 2-7.
To download data files containing CR-LF codes in records to the PDT 1100:
1. At the host computer, specify the +C option in Ir-Transfer Utility C DLL
2. At the PDT 1100, set the [Data] on the space code handling screen in System Mode
(or in PDT 1100-BASIC 3.0, specify the T option to “protocolspec” in the
XFILE
statement) to regard space codes in the tail of a data field as data.
If [Ignore] is selected (or no T option is specified), the PDT 1100 ignores space codes in the
tail of a data field and data is not transferred correctly.
For [Data] setting, refer to the PDT 1100 Product Reference Guide. For T option setting in
the
XFILE
statement, refer to the PDT 1100 Programmer’s Guide.
Specified Record Length
Record n1 CR LF Record n2 CR LF
Specified Record Length
Record n1 CR LF Record n2 = Transmitted in a single block