ᮣ
Battery recharge posts
The battery recharge posts, one on each side of the optical
coupler, make contact with spring-loaded posts on an optical
communication cradle and are used to recharge the PTC’s
nickel-cadmium battery pack.
ᮣ
Display
The PTC-860’s display screen shows the information you type
or scan into the PTC and messages and instructions from the
PTC or the host computer. The screen is a supertwist liquid
crystal display (LCD).
The display can show up to sixteen lines of information, each
line sixteen or twenty-one characters long. In addition, the
display is graphics supported, which allows a variety of
character sets to be displayed and enables the 16-line display
to emulate an 8-line display.
Above the display are two light-emitting diode (LED)
indicators. The green LED glows when the battery pack is
being charged. The red LED glows when the batteries are low.
The low-battery LED works only when the PTC is turned on.
ᮣ
Elastic strap
A wide elastic strap on the back of the PTC is used as a hand
strap. It secures the PTC to the palm of your hand, making it
easier to hold onto the PTC when you are using it.
ᮣ
Keyboard
The keyboard on the PTC-860 can have fifty, forty, or
twenty-four keys. Each keyboard has two different types
of keys: data keys and function keys.
26