Filter
Top Products
CAUTION! Do not operate a PTC-860NI with any
attached accessories in a hazardous location. Accessories
are approved for use with the PTC-860NI only in
non-hazardous locations.
ᮣ
Handling the PTC-860
The following information can help to ensure you receive
reliable, trouble-free service from your PTC-860.
•
Do not open the PTC-860’s case. Only a trained technician
can service the parts inside the PTC’s case.
•
If you store a PTC-860 containing a nickel-cadmium battery
pack in below-freezing temperatures for more than 1 hour,
do not charge the battery pack until it warms up to room
temperature.
•
Make sure the PTC-860 is off before you connect or remove
any accessories or replace the batteries.
•
Make sure all accessories connected by cable are connected
correctly and all accessories are locked into place.
•
Do not connect or use any accessories with a PTC-860NI in
a hazardous location.
•
Use only an AFAT nickel-cadmium battery pack in the
PTC-860NI.
•
Use only Telxon-approved batteries and accessories. Do not
attempt to connect any electrical device that is not part of
your PTC-860 system to the PTC-860.
•
Protect the PTC-860 from excessive heat, cold, and
moisture and from harsh, dirty environments.
•
Do not insert anything into the 25-pin connector.
•
Do not remove any of the rubber or plastic plugs on the
PTC-860’s case, except to add a bar-code reader.
41