34 3 Marvell Configuration Utility
• “Encryption Method” – options are TKIP, WEP, or SECURITY OFF, depending on the
Authentication mode.
• “WEP Key Setting” – if WEP encryption method is selected, the WEP keys can be config-
ured (see figure 28 “Security Tab – WEP Settings”).
Configure WEP Keys
Clicking the CONFIGURE WEP KEYS button displays the window “Configure WEP Key”.
Figure 29. Configure WEP Key
• “Key Format” – either ASCII C
HARACTERS or HEXADECIMAL DIGITS.
• “Key Size” – 40-
BIT or 104-BIT:
• 40-
BIT, 5 character ASCII key size (40-bit, 10 character hexadecimal)
• 104-
BIT, 13 character ASCII key size (104-bit, 26 character hexadecimal)
• “Transmit Keys” – there are four transmit keys. The key value is displayed in ASCII or
hexadecimal, depending on the format selected. Likewise, the key size shown depends
on the key size selected.