Filter
Top Products
SysKonnect SK-54C1 Wireless LAN Cardbus Adapter
Statistics Tab 43
Transmit Section
The “Transmit” section shows the information on the packets sent.
Figure 43. Transmit Section
• “Total Packet” – reports the total number of packets transmitted.
• “Unicast Packet” – reports the number of packets transmitted by the adapter that were
destined for a single network node.
• “Multicast Packet” – reports the number of packets transmitted by the adapter that were
destined for more than one network node.
• “Single Retries” – reports the number of packets that require one retry before the adapter
received an acknowledgement.
After the adapter sends a packet, it waits for an acknowledgement from the receiving
radio to confirm that the packet was successfully received. If the acknowledgement is not
received within a specified period of time, the adapter retransmits the packet.
• “Multiple Retries” – reports the number of packets that require more than one retry before
the adapter received an acknowledgement.
• “Failed Count” – reports the number of packets that were not successfully transmitted
because the adapter did not receive an acknowledgement within the specified period of
time.
• “RTS Success” – reports the number of RTS attempts that were successful.
• “RTS Failure” – reports the number of RTS attempts that were not successful.
• “ACK Error” – reports the number of unicast transmit attempts for which no acknowledge-
ment was received.
Receive Section
The “Receive” section shows the information on the packets received.
Figure 44. Receive Section
• “Total Packet” – reports the total number of packets received.
• “Unicast Packet” – reports the number of packets received by the adapter that were des-
tined for a single network node.