Filter
Top Products
38 3 Marvell Configuration Utility
Figure 36. WPA Radius Configuration for WPA 802.1 PEAP
5. Enter all required information (Login Name, Password, Domain).
Protocol
On the PROTOCOL tab the user can set or change protocol information related to the network
connection.
Figure 37. Protocol Tab
The tab provides the following options:
• Do not change settings – If this checkbox is activated, the protocol settings are not
changed when the profile is applied.
• “Use below settings” – If the Do not change settings checkbox is deactivated, some of
the protocol settings below can be changed:
• “Power Save Mode” – Sets the power mode. Available options are C
ONTINUOUS
ACCESS and MAX POWER SAVE. The default is CONTINUOUS ACCESS.
• “Preamble (802.11b)” – Sets the radio preamble to A
UTO or LONG. This option takes
effect only when attaching to an 802.11b network.
•“Transmit Rate” – The range of the data rate depends on the type of access point
that the SysKonnect Cardbus Adapter is connected to. The default setting is A
UTO.