Filter
Top Products
After a few seconds, the computer’s display will turn on and your computer will begin to
execute the Power On Self Test or POST to check if all system components are running pro-
perly. Any error found during the test will be displayed on the screen and may generate short
beep sound as well.
After the test, the screen will also display a message "press <F2> to enter SETUP". You
don’t need to run this program at the moment as your dealer already made the necessary set-
tings for your computer optimal operation. Refer to Chapter 6 on running the SETUP pro-
gram later.
After the test has completed, your computer will start to search and boot up the operating
system from your hard drive. The notebook computer normally comes with a Windows ope-
rating system pre-installed in your hard drive. Consult the Windows manual on how to use
the program. If not, contact your dealer for assistance.
2.4 Adjusting the Display Controls
The LCD brightness adjustment is controlled by <Fn> +<F8> and <Fn> + <F9> keys res-
pectively. You need to press these hot-key controls after powering on your notebook to suit
your viewing pleasure.
The Brightness hot-key control adjusts the brightness on the LCD. The brightness hot-key
control will not set the LCD completely dark or bright; it provides sufficient lighting to the
LCD to match the external lighting of the surrounding. The brighter the room, the more you
need to increase the brightness of the LCD.
English
MANUAL INGLES OK 20/7/06 11:40 Página 44