Filter
Top Products
2. Connect the connector cable of the monitor to the VGA port at the back of your computer.
Secure the cable connection with the screws provided.
3. Connect the monitor power cable and plug it into a properly grounded wall outlet.
4. Turn on the power of the monitor.
5. Turn on your computer. Both the LCD panel and the monitor screen will show the display.
Your computer is set at default to run at simultaneous display mode.
6. If you only want to show the display on the external monitor or projector and shut off the
LCD display, you can use the <Fn> + <F3> hot-key to switch display type between LCD and
external monitor. Keep pressing the hot-key until you get the display to external monitor only.
• Refer to Chapter 3 regarding the possible External CRT resolutions and how to
change the display properties.
5.3 Using the IEEE 1394 Port
IEEE 1394, also known as FireWire, is a high-bandwidth serial bus developed by Apple and
Texas Instruments. IEEE 1394 supports 100, 200, and 400 Mbps (Megabit per second) trans-
fer rates and is widely used for downing video from digital camcorders to the computer. In
addition to its high speed, IEEE 1394 enables isochronous (real-time) data transfer. This
makes it ideal for devices that transfer high-bandwidth of data in real-time, such as video
devices. It supports both Plug-and-Play and hot plugging, and also allows for the connection
of up to 63 devices.
With built-in IEEE 1394 port, this computer enables the peripheral devices in transmitting
digital video data or data backup. The Windows system will automatically recognize it after
installing a suitable driver for it. Please visit Microsoft's web site for more information about
it. Moreover, you should install the driver of peripheral device to connect with the IEEE
1394 port, for details please refer to the manual that comes with your peripheral device.
English
MANUAL INGLES OK 20/7/06 11:40 Página 75