Filter
Top Products
programs. You need to format the hard disk before using. The internal hard disk is normally
assigned as Drive C after formatting. Sometimes divided into two partitions, adding a Drive
D. Since your computer supports different hard disk capacities (up to 80 GB), you also need
to setup the disk type first on your computer’s BIOS SETUP program before formatting the
disk drive. Your computer supports Auto-detect hard disk type, so you do not need to set it
manually. Your dealer should already have done all of this for you. You can refer to Chapter
6 on how to run the BIOS SETUP program.
You can increase the system’s storage capacity by replacing the standard hard disk drive with
a drive of greater storage capacity.
• If you wish to replace your hard disk, contact your local dealer for more information
about this dealer-installable device.
• Always turn off your computer first before removing the hard disk drive. Failure to do
so will damage the computer and the hard disk. Avoid jarring or moving the computer
while the hard disk is still being accessed.
3.7 How to Access the Optical Drive
Your system ships with an optical disk drive installed on the left side of your computer. You
would normally use the drive for installing operating system and software application pro-
grams.
To insert and remove a disc on the drive:
1. Make sure the computer is turned on. Press the eject button found on the door cover of the
English
MANUAL INGLES OK 20/7/06 11:40 Página 59