Filter
Top Products
TANDBERG GW Dataport Command Interface User Guide
D13202 Rev 01 23
chanstat
Used to list channel status information for the PRI interface.
chanstat [pri interface] [channel]
Status format:
chanstat <PRI interface> <channel> <channel-status> <calling-number>
<causeLoc>:<chanCause> <connection-time(sec)>
---
Parameters:
•
PRI interface: a/b/c/d.
Letters identifying the different PRI interfaces.
o
a
: PRI interface 1
o b: PRI interface 2
o c
: PRI interface 3
o d
: PRI interface 4
• channel: 1..31(E1-PRI), 1..24(T1-PRI)
• channel-status: idle / answering / calling / connect / disconnecting /
disconnected
• calling-number:
Remote number. (“” if no valid number)
• causeLoc:
Standard ISDN cause location value (255 indicates no valid
code).
•
chanCause:
Standard ISDN cause value (255 indicates no valid code).
• connection-time(sec):
Connection time in seconds.
Example of
chanstat
feedback:
*S chanstat a 28 connect 123456789 255:255 334Sec
encstatus
Returns encryption status for the active calls.
encstatus [callid]
Status format:
encstatus <callid> <incomingstat> <outgoingstat> <check-code>
---
Parameters:
• callid: 1..16/32.
Identifier referring to a call.
•
incomstat: off/idle/des/aes128/negotiate
•
outgoingstat: off/idle/des/aes128/negotiate
•
check-code:
Key that can be manually presented by the participants to
confirm secure connection
Example of
encstatus
feedback:
*S encstatus 11 des des 9FE389C8F664F3F5
Lists the active terminals in a GW call.
gwcalls [gwid]
Status format:
gwcalls <gwid> <isdn callid> <isdn termnumber> <h323 callid> <h323
termnumber>
---
Parameters:
• gwid: 1..16.
Identifier referring to a GW call.
• isdn callid:
The call id of the ISDN terminal
• isdn termnumber:
The number of the ISDN terminal