NOTE: The Alignment controls are functional only when the P350 is not
in “menu” mode.
MENU
This key controls the display of the on-screen control “menus.” If an
on-screen controls “menu” item is displayed, pressing this key will make
the display disappear (on-screen displays normally disappear after five
seconds). To enter “menu” mode and display the first page of on-screen
controls, press and release
MENU/RESET
, then press either the
page-up or page-down double-arrow key to “step” through the “menus”
until the desired On-Screen Control page is displayed.
RESET
To reset the Firefly™ P350 image to the original factory settings, press
and hold
MENU/RESET
until the on-screen display indicates
READY
TO RESET
(approximately five seconds). When the key is released the
P350 will reset, clearing all image enhancements that you have made,
restoring the factory settings as the default settings. (If
MENU/RESET
is released before
READY TO RESET
is displayed, the factory settings
will not be restored.)
SOURCE
Press
SOURCE
to select video input from
COMPUTER
,
VIDEO
,
S-VIDEO
jacks. If only one video source is “live,” the screen will go
blank for a moment, then return control to the “live” video source.
MENU/PAGE
The
MENU/PAGE
keys are used to step through the On-Screen control
pages. Each subsequent press of one of the
MENU/PAGE
double-arrow
keys will display another page of On-Screen controls. The 6 (page-up)
and 7 (page-down) keys may be used at any time.
POWER
Press
POWER
to turn off the projector and lamp. Press
POWER
again
to turn on the projector and lamp.
☞
16 User Manual