Filter
Top Products
Lamp Replacement
1. Press
POWER
to turn off the projector and lamp. (The main cooling
fans will continue turning for approximately three minutes.)
WARNING! To prevent burns, allow the lamp access door and
projector lamp to cool before attempting to replace the lamp.
2. When the main cooling fans have stopped turning and the P350 is
cool, unplug the power cord.
3. Lower the mirror, then close the P350 down to its storage position.
4. Turn the P350 over on a flat, stable surface.
Lamp
Compartment
Screws
Figure 14. Lamp Replacement
User Manual 23