Filter
Top Products
Illuminated Indicators
POWER
The
POWER
button glows red when the P350 is plugged into an AC
wall outlet and is ready to be turned on; one of the cooling fans should
be running at this time.
Keypanel When the keypanel is lit, indicates that the P350 is in operation; the
projector lamp should also be on.
Remote Control
The RC-10 remote control can be used to remotely change all of the
keypanel and on-screen control functions. When a remote control
button is pressed, the LED on the remote control blinks rapidly.
NOTE: When the remote control operating distance becomes too short
for your purposes, install a fresh battery as described in the Remote
Control Battery section of this manual.
To use the remote control, point it at the front of the projector and press
a key, or “bounce” the IR signal off the viewing screen.
☞
User Manual 21