Filter
Top Products
RamSan-500 User’s Manual 10 of 48
Figure 3– Fibre Channel Port Locations
Figure 3– Fibre Channel Port Locations shows the port layout for the
RamSan-500. Each controller has two or four Fibre Channel ports: A and B,
on the top and bottom respectively. The FC-77 ports on the system are
capable of connecting to point-to-point, arbitrated loop, and switched
fabric topologies at either 4-Gigabit or 2-Gigabit speeds.
3.3 Connecting to a Network
Your RamSan-500 includes a Gigabit Ethernet port for remote
management over a network. You use this connection to configure the
storage and management features.
Figure 4 – Gigabit Ethernet Port Location
Fibre Channel Ports
Ethernet Port