Filter
Top Products
RamSan-500 User’s Manual 28 of 48
Figure 15 – Web Monitor Change User
Type in the new password and confirm it. Hit the “OK” button when
finished.
4.10.3
4.10.34.10.3
4.10.3 Adding
Adding Adding
Adding U
UU
Users
serssers
sers
You can add new users by selecting the “Add…” button in the “User
Management” window. Doing so will bring up the “Add User”
window shown in Figure 16.
Figure 16 – Web Monitor Add User
You can add high-privileged users by assigning the new user to the
“admins” group. You can give the new user low-privileges by
assigning them to the “users” group.
4.11 Basic LUN Creation
The most common management activity on the RamSan is LUN
provisioning. This section will go over the basic LUN provisioning activities
(creating a LUN and linking it to a port), for more in-depth configuration
details please consult the RamSan Web Interface Guide.
4.11.1
4.11.14.11.1
4.11.1 Creating a LUN
Creating a LUNCreating a LUN
Creating a LUN
You can create a LUN from the “Logical Units” tree node by right-
clicking and selecting “Create” or by clicking on the “Create” button
after highlighting “Logical Units”. This is shown in Figure 17.