Filter
Top Products
Chapter 3: Advanced Configuration
40
This function works only if your gateway is in the RG mode. When accessing your gateway from a
remote location, you must use HTTP port 8080 and your IP Stack 3 address. This is the "WAN IP
address" that appears at the Network...WAN page. For example, if this IP address were
157.254.5.7, you would navigate to http://157.254.5.7:8080 to reach your gateway from a
remote location.
Check Multicast Enable and then click Apply to enable multicast traffic to pass WAN <=> LAN.
You may need to enable this to see some types of broadcast streaming and content on the
Internet, such as webcasting of a popular live event.
IP Filtering Web Page
This page enables you to enter the IP address ranges of PCs on your LAN that you don’t want to
have outbound access to the WAN. These PCs can still communicate with each other on your LAN,
but packets they originate to WAN addresses are blocked by the gateway.
Fig. 25