Filter
Top Products
E-DOC-CTC-20080421-0010 v1.0
31
5 Telephony
5.2 Installing the Thomson DECT USB Adapter
Introduction
If your package contains a Thomson DECT USB Adapter, you can use this Thomson DECT USB Adapter to
turn your Thomson Gateway into a DECT base station. The only thing you need to do is plug in your
Thomson DECT USB Adapter and register your DECT phones.
Procedure
Proceed as follows:
1 Connect the flexicable to the Thomson DECT USB Adapter:
2 Plug the Thomson DECT USB Adapter in the USB master port.
3 On of the red LEDs on the Thomson DECT USB Adapter start blinking. As long as this LED is blinking you
will be able to register your DECT phone.
4 Register your DECT phone You can now connect your DECT phone(s) to the Thomson Gateway base
station. For more information, see “5.3 Connecting a DECT Phone to Your Thomson Gateway”.