Filter
Top Products
E-DOC-CTC-20080421-0010 v1.0
42
6 Getting the Most O
ut of Your Thomson Gat
eway
6.1 Sharing Content on your Network
Introduction
The Thomson Gateway allows you to store your data on a centralised place in the network. This way you can
share your files with everyone that is connected to your network.
What do I need?
A FAT32 formatted USB storage device.
Procedure
Proceed as follows:
1 Connecting your USB storage device to the Thomson Gateway.
2 Configure Content Sharing on the Thomson Gateway.
Connecting your USB storage device to the Thomson Gateway
Plug your USB memory stick or external hard disk in (one of) the USB master port(s) of your Thomson
Gateway.
To format your device for FAT32, consult the help of your operating system. Make sure to make a
copy of your data before you doing this. Formatting your device will erase all data.
If you need to remove your USB storage device from the Thomson Gateway, make sure to
unmount it first. For more information, see “6.1.5 Safely Removing your USB Storage Device” on
page 51.