Filter
Top Products
Multi-Manual Mode
Up to six selected stations can be operated at the same time using Multi-Manual mode. A temporary run
time from 1 to 59 minutes is given to each station for this operation.
Caution: Prior to Multi-Manual operation, ensure that combined current draw of all stations operating
at the same time (including pump relay) does not exceed 3.2 Amps (holding).
1.
Press to select the Multi-Manual indicator. The Program
indicator will light and Station number 01 will be shown (flashing)
in the left display.The right display will show 00 run time.
2. Press or as needed to select the desired station.
3. Press – The Run Time digits will begin flashing.
4. Press or as needed to select desired Run Time (01 – 59)
5. Press – Selected station will start.
6. Repeat steps 2 – 5 to start up to five additional Stations. If the
same run time is desired, skip steps
3 and 4.
Note: Any additional stations entered while six stations are in
operation will be ignored.
Note: After 1 minute has elapsed, the displays will begin alternating
between the time/day and the program status, showing (in sequence)
each operating station and its remaining run time.
ENTER
START
12
:
:
AM
Fr
:
:
:
:
Run Time
Station Number