Filter
Top Products
112
Setting Your Machine
Fax Parameters
No. Parameter
Setting
Number
Setting Comments
001 CONTRAST
(HOME)
1 Lightest Setting the home position for the CONTRAST.
2 Lighter
*3 Normal
4 Darker
5 Darkest
002 RESOLUTION
(HOME)
1 Standard Setting the home position for the RESOLUTION.
*2 Fine
3 S-Fine
4 600dpi
5 Halftone
(Fine)
6 Halftone
(S-Fine)
7 Halftone
(600dpi)
004 STAMP
(HOME)
*1 Off Setting the home position for the STAMP.
To select the stamp function when document is stored
in memory, see Fax Parameter No. 28.
2 On
005 MEMORY
(HOME)
1 Off Setting the home position for the MEMORY.
*2 On
006 DIALING METHOD 1 Pulse Selecting the dialing method.
*2 Tone
007 HEADER PRINT *1 Inside Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside : Outside TX copy area.
No print : Header is not printed.
2 Outside
3 No print
008 HEADER FORMAT *1 Logo, ID No. Selecting the header format.
2 From To
009 RCV'D TIME PRINT *1 Invalid Selecting whether the machine prints the received date
& time, remote ID, percentage of reduction and page
number on the bottom of each received document.
2 Valid
010 KEY/BUZZER VOLUME 1 Off Selecting the key touch beep sound.
*2 Soft
3 Loud
012 COMM. JOURNAL 1 Off Selecting the home position of printout mode for
COMM. Journal Off/Always/Inc. only.
Off : Does not print
Always :Always prints
Inc. Only : Prints only when communication has
failed.
2 Always
*3 Inc. Only
013 AUTO JOURNAL PRINT 1 Invalid Selecting whether the machine prints the journal
automatically after every 200 transactions.
*2 Valid
014 FILE ACCEPTANCE
REPORT
*1 Invalid Selecting whether the machine prints the file
acceptance journal.
If you set this parameter to valid, a journal will be
printed out after a new job is stored in the memory.
2 Valid
017 RECEIVE MODE 1 Manual Setting the reception mode to automatic or manual.
*2 Auto
Fax Parameter Table