Filter
Top Products
117
Setting Your Machine
159 SUBJECT LINE ENTRY *1 Invalid Selecting whether the "Subject" line can be
programmed during each transmission.
2 Valid
160 DEFAULT DOMAIN 1 Invalid
Selecting whether the machine accepts to insert the
Default Domain when entering Manual Number Dialing.
*2 Valid
161 DNS SERVER 1 Invalid Selecting whether to use the DNS Server for the
Internet communication.
*2 Valid
163 ROUTING HEADER *1 Invalid
Selecting whether to add the Header Print information of
the Routing Station on the top edge of each routed pages.
2 Valid
164 IFAX XMT HEADER
(Email only)
*1 Included Selecting whether to include the header when sending
a document to an addressee in the same Domain as
specified in the Default Domain parameter. (This is
useful when using the machine to scan documents
back to your PC)
Note: When sending to a Domain other than as
specified in the Default Domain parameter, the
header will be included regardless of the
selection.
2 Not included
168 CC/BCC STATION *1 Invalid Selecting whether to allow the CC/BCC email
address(es) to be entered.
2 Valid
169 DHCP CLIENT 1 Invalid Select whether the machine would automatically
acquire the Network Parameters from the DHCP
Server. (Such as IP Address, Subnet Mask, Default
Gateway IP Address,etc.)
Note: If you change the setting of this parameter, the
machine will reboot automatically.
*2 Valid
170 SMTP
AUTHENTICATION
(See page 118, Note 3)
*1 Invalid If you transmit to the SMTP server, user name and
password are used for authentication. Selecting "Valid"
allows you to set up the user name and password.
2 Valid
171 POP BEFORE SMTP
(See page 118, Note 3)
*1 Invalid If you transmit to the SMTP server, POP user name
and POP password are used for authentication.
2 Valid
172 DIRECT IFAX XMT *1 Invalid Selecting whether to be prompted during Phone Book
registration if the station you are programming is to
receive Internet Fax directly without going through a
Mail Server.
2 Valid
173 DELIVERY NOTICE
(HOME)
*1 Off Setting the home position of whether to request a
Message Disposition Notification (MDN) for a delivery
processing confirmation indicating that the message
(email) was read, when sending an email/Internet Fax.
This setting will be the default value for the Function
Select Mode (F8-2).
2 On
174 APOP
AUTHENTICATION
(See Note 3)
*1 Invalid This parameter allows you to encrypt the protocol for
the POP password security when connecting with the
POP server.
2 Valid
No. Parameter
Setting
Number
Setting Comments