Filter
Top Products
140
NOTE
1. After identifying the problem and taking the recommended action, if the Information Codes
keep reoccuring or Information Codes that appear on your machine but are not listed above,
please contact your service representative.
Info.
Code
Meaning Possible Action Page
730 Cannot retrieve the Journal nor program the Internet
Parameters and the Auto Dialer remotely via email
from a PC.
Check that the Fax Parameter No. 158 (PC
Remote Update) is set to “Valid”.
116
731 The dialer buffer for manual dialing was full (50
stations) when the Relay Transmission Request was
received.
Request the sender to resend the Relay
Transmission Request after the reserved
communication is finished.
--
800/814/
816/825
Machine was requested to relay a document or
Confidential Communication but has no capability.
Check with the other party. --
826 Received Sub-address is not registered in the Auto
Dialer (One-Touch/ABBR. Dialing).
Check the Auto Dialer.
Check the remote station.
--
870 Memory overflow occurred while storing documents
into memory for transmission.
1. Transmit documents without storing them
into memory first. Use Direct Transmission
when using G3 Fax Communication.
2. Install Optional Memory (SD Memory
Card).
44
144
871 Overflow of the file management area occurred. Wait until the machine finishes printing or
sending the documents.
--
Problem Solving
Information Code