Filter
Top Products
114
Setting Your Machine
Fax Parameters
039 PIN CODE ACCESS *1 None Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code.
2 Suffix
3 Prefix
053 SUB ADDRESS
PASSWORD
(----) Setting a password (up to 20 digits) for secured sub-
address communication.
054 FAX FORWARD *1 Invalid Selecting whether the machine performs Fax
Forwarding to the specified destination.
2 Valid
056 COVER SHEET *1 Off Setting the home position of the Cover Sheet
parameter in the Select Mode. (See page
66)
2 On
058 LANGUAGE *1 A-ENGLISH Selects the default message language for the display.
2 C-FRENCH
3 SPANISH
077 DEPARTMENT CODE *1 Invalid Selecting whether the machine performs the
Department Code operation.
2 Valid
082 QUICK MEMORY XMT 1 Invalid Selecting whether the machine performs Quick
Memory Transmission.
Invalid : Stores all documents into memory first
before dialing the telephone number.
Valid : Starts dialing the telephone number
immediately after storing the first page.
(This feature is not available when the Fax Parameter
No. 133 (Job Build) is set to "2: On". )
*2 Valid
088 LINE SELECTION *1 Auto Selecting the transmitting telephone line when the
optional G3 Communication Port Kit is installed.
Auto : Selects the available telephone line for
transmission automatically.
Line-1 : Selects Line-1 as the only transmitting
telephone line.
Line-2 : Selects Line-2 as the only transmitting
telephone line.
Note:
Regardless of the setting selection above, the unit
will answer and receive on both telephone lines.
2 Line-1
3 Line-2
095 DUPLEX PRINT *1 Invalid
Selecting whether the machine performs duplex print
when receiving the document via G3 Fax or Internet Fax.
2 Valid
097 SPECIAL TRAY
No.1 - 2
*1 None Select a Special Tray that will not be used for printing
received faxes (Tray 1 or 2). One Tray must always be
available for receiving faxes. This setting is available
when the
optional 2nd Paper Feed Module is installed.
2 Tray 1
3 Tray 2
099 MEMORY SIZE
(SD Memory Card)
- - Displays the amount of memory size.
118 FAX FUNCTION
DETECT
1 Invalid Setting the number of digits required to determine the
entered number is a Fax Telephone number.
Upon detecting the specified number of digits, the
machine will automatically switch to the FAX Mode
when it is in the Copier Mode.
2 4-Digit
3 5-Digit
*4 6-Digit
5 7-Digit
6 8-Digit
No. Parameter
Setting
Number
Setting Comments