Filter
Top Products
12 Network Fax Guide — Installing Network Fax Software
Installing Network Fax Software
This chapter includes procedures for installing software required to enable the fax printing and
online address books for this equipment. It is recommended that you read these instructions in
their entirety before beginning the installation process.
Overview
Before you can begin utilizing the network fax feature for this equipment, you must install the
software using the Client2 CD-ROM provided. You will use the InstallShield client software
setup process.This section describes several ways to add N/W-Fax driver to user’s workstations.
Prior to installing the N/W-Fax driver and Address Book Viewer, the administrator must install
specific hardware and configure the fax options. Only authorized users can modify the device.
System Requirements
The TWAIN driver and File Downloader are available for following environments:
Display Resolution
• 1024 x 768 dots or more
Display Color
• High Color (16bit) or higher is recommended
CPU
• Pentium 133 MHz minimum (Pentium 266 MHz or faster recommended)
Memory
• 64MB for Windows 98
• 96MB for Windows Me and Windows NT 4.0
• 128MB for Windows 2000/XP/Server 2003
OS
• Windows 98 (Windows 98 Second Edition Recommended)
• Windows Me
• Windows NT 4.0 Service Pack 6a
• Windows 2000 Service Pack 3
• Windows XP Service Pack 1
• Windows Server 2003
Before Installing Client Software
Before installing the client software, confirm the followings to perform an appropriate installa-
tion.
— When Address Book Viewer Has Been Installed
If the Address Book Viewer has been installed from either the e-STUDIO4511 Series Client2
CD-ROM, e-STUDIO450 Series Client2 CD-ROM, or e-STUDIO280 Series Client2 CD-ROM,
you do not have to install it from the other one. In that case, please install only the N/W-Fax
driver.
If you want to install Address Book Viewer from the other CD-ROM, uninstall the Address
Book Viewer then install it. When you uninstall the Address Book Viewer, please click [No] at
the dialog box that displays the message to delete the settings for the Address Book Viewer so
that you can restore the settings after installing new one.
Installing the N/W-Fax Driver and Address Book Viewer
You can install the N/W-Fax driver and Address Book Viewer from the Client2 CD-ROM or
TopAccess.