Filter
Top Products
Network Fax Guide — Managing Address Book 63
Configuring Discovery Settings
You can configure the discovery settings.
1) Devices
Click the arrow button to display the pull down list and check the model name that you want
to search.
2) Network - Enable IPX/SPX Search
This is disabled because the Address Book Viewer does not support the IPX/SPX connec-
tion.
3) Network - Enable TCP/IP Search
Check on this to search devices that connect to the TCP/IP network. This is available only
when the TCP/IP protocol is installed in your computer.
When this is enabled, select how it searches printers in the TCP/IP network.
• Search local subnet — Select this to search devices in local subnet.
• Specify a range — Select this to search devices in specific range of IP addresses. When
this is selected, enter the IP addresses in “From” field and “To” field to specify the
range.