Filter
Top Products
278
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
4.ADDING STAPLES (OPTIONAL) (Cont.)
12
5
Pull out the seal holding the staples
straight upward.
6
Return the staple cartridge to its original
position.
- Insert the cartridge until it is caught by the latch and fixed with a
click sound.
If “Check staple cartridge” remains, repeat the above procedure
from step 1 to 6.
7
Install the finisher to the equipment.
Be careful not to let your fingers be caught between the equipment
and the finisher (optional).
This could injure you.