Toshiba 2330C All in One Printer User Manual


 
2 PRINTING FROM WINDOWS
56 Setting Up Print Options
Configuration Tab
The Configuration Tab allows you to configure options. When any optional unit is installed in this equipment, set the
configuration of the machine on this tab. The Configuration tab can be displayed only from the Printers folder (and not
displayed when displaying the properties from the application’s Print dialog box).
To perform settings on the [Configuration] tab menu, you need to select the printer driver of this equipment on the
Printers folder, and then select as follows: [File] menu -> [Run as administrator] -> [Properties]
Enter the administrator password if required.
- If the [File] menu is not displayed, press [Alt].
- If the User account control dialog box is displayed, click [Continue] in this dialog box.
1) Model Selection
This sets the model name of the equipment.
- e-STUDIO4520C/e-STUDIO3530C/e-STUDIO3520C/e-STUDIO2830C/e-STUDIO2820C/e-STUDIO2330C
2) Drawers
This sets whether or not the optional drawers or LCF are installed.
- None — Select this when neither drawer nor LCF is installed.
- Drawer3 — Select this when 3rd drawer is installed.
- Drawer3 & Drawer4 — Select this when the the 3rd drawer and 4th drawer are installed.
- LCF
— Select this when the LCF is installed.
LCF is not available for some countries or regions.
3) Finisher
This sets whether or not the optional finisher is installed.
- None — Select this when a finisher is not installed.
- Hanging Finisher — Select this when a Hanging Finisher is installed.
- Finisher — Select this when a Finisher is installed.
- Saddle Stitch Finisher
— Select this when the Saddle Stitch Finisher is installed.
4) Hole Punch Unit
This sets whether or not the optional hole punch unit is installed.
- None — Select this when a hole punch unit is not installed.
- 2 Holes — Select this when a 2 hole punch unit is installed.
- 2/3 Holes
— Select this when a 2/3 hole punch unit is installed.
- 4 Holes (F) — Select this when a 4 hole (F) punch unit is installed.
- 4 Holes (S) — Select this when a 4 hole (S) punch unit is installed.
1
3
2
4
5
7
8
6