Filter
Top Products
118
5.USING THE EDITING FUNCTIONS
5.2 IN 1/4 IN 1 (Cont.)
5
1
Place paper in the drawer(s).
- "4.SETTING COPY PAPER" Page 35
- When using this mode in bypass copying ("Bypass Copying"
Page 61), be sure to specify the paper size.
To make copies onto paper which is not the same size as originals,
press the [ZOOM...] button to display the screen on the right, and
then press the desired paper size and the [AMS] button.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 51
3
Press the [EDIT] button to enter the edit
menu, and then press the [2 IN 1/4 IN 1]
button.
4
Select the type of image combination.
- Press the [2 IN 1] (or [4 IN 1], [2 IN 1 DUPLEX] or [4 IN 1
DUPLEX]) button.
5
Select the type of the original.
- Press the [1 SIDE] (or [2 SIDE]) button.
z Select other copy modes as required.
6
Press the [START] button.
- When placing an original on the glass, follow the steps 5 to 6 on
"Copying Procedure" Page 48 continuously.