Filter
Top Products
2. Installing Client Software
12 Network Fax Guide — Installing Network Fax Software
Installing Network Fax Software
This chapter includes procedures for installing software required to enable the fax print-
ing and online address books for this equipment. It is recommended that you read these
instructions in their entirety before beginning the installation process.
Overview
Before you can begin utilizing the network fax feature for this equipment, you must
install the software using the Client2 CD-ROM provided. You will use the InstallShield
client software setup process.This section describes several ways to add N/W-Fax
driver to user’s workstations. Prior to installing the N/W-Fax driver and Address Book
Viewer, the administrator must install specific hardware and configure the fax options.
Only authorized users can modify the device.
System Requirements
The N/W-Fax driver and Address Book Viewer are available for following environments:
• Display Resolution
1024 x 768 dots or more
• Display Color
High Color (16bit) or higher is recommended
•CPU
Pentium 133 MHz minimum (Pentium 266 MHz or faster recommended)
•Memory
64MB for Windows 98
96MB for Windows Me and Windows NT 4.0
128MB for Windows 2000/XP/Server 2003
•OS
Windows 98 (Windows 98 Second Edition Recommended)
Windows Me
Windows NT 4.0 Service Pack 6a
Windows 2000 Service Pack 3
Windows XP Service Pack 1
Windows Server 2003
Before Installing Client Software
Before installing the client software, confirm the followings to perform an appropriate
installation.
— When Address Book Viewer Has Been Installed
If the Address Book Viewer has been installed from either the e-STUDIO850 Series
Client2 CD-ROM, e-STUDIO4511 Series Client2 CD-ROM, e-STUDIO450 Series
Client2 CD-ROM, or e-STUDIO280 Series Client2 CD-ROM, you do not have to install it
from the other one. In that case, please install only the N/W-Fax driver.
If you want to install Address Book Viewer from the other CD-ROM, uninstall the
Address Book Viewer then install it. When you uninstall the Address Book Viewer,
please click [No] at the dialog box that displays the message to delete the settings for
the Address Book Viewer so that you can restore the settings after installing new one.
Installing the N/W-Fax Driver and Address Book Viewer
You can install the N/W-Fax driver and Address Book Viewer from the Client2 CD-ROM
or TopAccess.