Filter
Top Products
2. Installing Client Software
Network Fax Guide — Installing Network Fax Software 13
This section describes about installing the N/W-Fax driver and Address Book Viewer in
the SMB environment. The N/W-Fax driver can be set up in the same connection as
the printer driver such as Parallel printing, USB printing, LPR printing, IPP printing, and
Novell printing. To set up the N/W-Fax driver in these connections, please refer to the
Printing Guide.
Installing from Client2 CD-ROM
This section describes how to install the fax client software for SMB environment which
is available for the local area network over TCP/IP.
NOTES: • To set up the N/W-Fax driver in other connections, please refer to the Printing
Guide.
• Before installing the printer driver for SMB environment, check with your system
administrator to make sure of the following:
- This equipment is connected to the network and turned on.
- The TCP/IP setting is correct on this equipment and your computer.
Installing the fax client software for SMB connection using the installer
The procedure here describes an installation on Windows 2000. The procedure is the
same when other versions of Windows are used.
NOTE: You must log in Windows as a user who has the “Administrators” or “Power Users” priv-
ilege when using the Windows NT 4.0, Windows 2000, Windows XP, or Windows
Server 2003.
1. Insert the Client2 CD-ROM into the CD-ROM drive.
• The installer automatically starts and the Choose Setup Language dialog
box appears.
• When the installer does not automatically start, double-click “Setup.exe” in
the Client2 CD-ROM.
2. Select your language and click [OK].
• The InstallSheild Wizard dialog box appears.