4. Managing Address Book
Network Fax Guide — Managing Address Book 83
Sending Options tab
In the Sending Options tab, following items are displayed:
SUPPLEMENT: When displaying the properties of a contact in the private address book, you can modify
the following settings:
- Use Sub Address and sender information
- Sub Address
- Sender Identification
• Use Device Settings — This is checked when the contact is set to use the device
settings rather than using the settings on this tab.
• Use Sub Address and sender information — This is checked when the subad-
dress transmission for this contact is enabled. When this is checked, a document
will be always sent using the specified sub address and SID. Also you can use this
contact to perform polling transmission from the mailbox in the remote facsimile
using the specified sub address and password.
• Sub Address — Display the sub address or mailbox number of remote facsimile
where a document will be sent.
• Sender Identification — Display the security password for the sub address if
required.
• Selective Polling — Display the mailbox number of remote facsimile where a docu-
ment will be retrieved.
• Password — Display the password for the selective polling if required.
• Overseas Calls — This is checked when calling the contact fax number will be
oversea call.
• Error Correction Mode — This is checked when the ECM for this contact is
enabled.
• Print Transmission Report — This is checked when printing the transmission
report after the transmission is enabled.
• Reduction — This is checked when the attenuation is enabled.
• Short Protocol — This is checked when the short protocol is enabled.
• Line Monitor — This is checked when the Line Monitor for the fax transmission is
enabled.
• Line Selection — Display whether the line 1 or line 2 is used for the fax transmis-
sion. The line 2 can be selected only when optional Line 2 board is installed.
• Transmission Type — Display whether the memory transmission or direct trans-
mission is used for the transmission.