Filter
Top Products
User's Manual
OPERATING BASICS
4-6
CAUTIONS: 1. Do not touch the laser lens. Doing so could cause
misalignment.
2. Do not keep foreign matter from entering the drive.
Check the back edge of the tray to make sure it carries
no debris before closing the drive.
4. Press gently at the center of the CD/DVD until you feel it click into place. The
CD/DVD should lie below the top of the spindle, flush with the spindle base.
5. Push the center of the drawer to close it. Press gently until it locks into place.
CAUTION: If the CD/DVD is not seated properly when the drawer is
closed, the CD/DVD might be damaged. Also, the drawer might not open
fully when you press the eject button.
Figure 4-7 Closing the CD/DVD drawer
Removing discs
To remove the CD/DVD, follow the steps below and refer to figure 4-8.
CAUTION: Do not press the eject button while the computer is accessing
the optical media drive. Wait for the CD/DVD-in-use indicator to go out
before you open the drawer. Also, if the CD/DVD is spinning when you
open the drawer, wait for it to stop before you remove it.
1. To pop the drawer partially open, press the eject button. Gently pull the
drawer out until it is fully opened.