Toshiba AT10-A Tablet Accessory User Manual


 
Inspect all connecting cables for loose wires and all connectors for
loose pins.
Always try to make detailed notes of your observations and keep them in a
permanent error log - this will help you to describe your problems to
TOSHIBA Support. In addition, if a problem recurs, the log you have made
will help to identify the problem faster.
Hardware and system checklist
This section discusses problems caused by your tablet’s hardware or
attached peripherals. Basic problems may occur in the following areas:
Internal display panel
Memory Media Card
Wireless LAN
Sound system
USB device
Bluetooth
Internal display panel
Apparent tablet's display panel problems may be related to the tablet's
setup and configuration.
Problem Procedure
Problems above
remain unresolved
or other problems
occur
You should initially refer to the documentation
supplied to you with the software to understand the
cause of the problems.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Memory Card
Problem Procedure
Memory media card
error occurs
Unmount memory media card by tapping All Apps
-> Settings -> Device
-> Storage and then insert
memory media card once again.
If the problem exist, remove the memory media
card from the tablet and then reinsert it in order to
ensure it is firmly connected.
If the problem persists, then you should refer to the
documentation supplied with your memory media
card for further information.
User's Manual 8-2