Filter
Top Products
2. PRINTER SETUP ENGLISH VERSION EO1-33047
2.7 Setting an Operating Environment
E2-42
2.7.7 IP Address Setting
(TCP/IP) (Cont.)
(3) Subnet Mask
This parameter is to set a Subnet Mask.
(4) Socket Port
This parameter is to enable a socket port and set a socket number.
<7>IP ADDRESS
SUBNET MASK
<7>IP ADDRESS
255 . 255 . 255 . 000
<7>IP ADDRESS
255 . 255 . 255 . 000
<7>IP ADDRESS
255 . 255 . 255 . 000
<7>IP ADDRESS
255 . 255 . 255 . 000
[PAUSE]
[PAUSE]
[PAUSE]
<7>IP ADDRESS
SOCKET PORT
[PAUSE]
[PAUSE]
NOTE:
A
fter the last 3-digit value is set,
p
ress the [PAUSE] key to go to
Socket Port Setting.
NOTES:
1. Pressing the [PAUSE] key
while “PORT ON 08000” is
displayed allows you to set the
port number.
2. Set a number for each digit by
using the
[RESTART] or
[FEED] key.
[RESTART] key: Increment
[FEED] key: Decrement
Range: 00000 to 65535
A number exceeding 65535 will
be automatically corrected to
65535.
3. Be careful not to set the same
port number that other
applications are using.
4. Press the [PAUSE] key to move
the cursor to the next digit.
5. After the last digit is set, press
the
[PAUSE] key to go to
DHCP Setting.
PORT ON 08000
<7>IP ADDRESS
DHCP
PORT ON 08000 PORT OFF -----
PORT ON 08000
PORT ON 08000
SOCKET PORT
[RESTART] or [FEED]
[PAUSE]
[PAUSE]
Enter a number for each digit of the
port number with the [RESTART] or
[
FEED
]
ke
y
.
[PAUSE]
[PAUSE]