Filter
Top Products
9. NETWORK SPECIFICATION
EO18-33013
(Revision Date: Feb. 27, 2007)
9.1 PRINT SERVER SETUP
9- 1
9. NETWORK SPECIFICATION
9.1 PRINT SERVER SETUP
1. Start the PS-Utility.
Note: Please download the PS setup utility which is required to configure the print server settings
for the B-SV4D-GS12-QM-R from Barcode Knowledge Pot at the following URL.
http://barcode.toshibatec.co.jp/Ris/products/barcode/support/en/index.php
2. Connect the printer to a PC with a LAN cable (cross cable).
3. Click on the [Discover Device] button.
4. A searched print server is displayed on the Device Name list box.
5. When the [Change IP Address] button is clicked, the following screen will appear.
Click on the Manually Assign radio button, and set the IP Address, Subnet Mask, and Default
Gateway. Then, click on the [OK] button.
Now that, the LAN settings on the printer is enabled. The current LAN settings can be confirmed
by a diag. test print.
[Discover Device] button
[Change IP Address] button
IP Address
Subnet Mask
Default Gateway
[OK] button