Filter
Top Products
4. REPLACING THE IMPORTANT PARTS
EO18-33013
4.11 Setting Up the Optional External Media Roll Hanger
4-15
4.11 Setting Up the Optional External Media Roll Hanger
1. Fix the External Media Roll Hanger on the rear of printer.
2. Put the label roll onto the 3”-diameter Media Shaft.
3. Place the Media Shaft onto the slots of the External Media Roll Hanger.
4. Pull the label forward through rear paper inlet, label guide to paper outlet.
External Media Roll Hanger
3”-diameter
Media Shaft
Label Roll
External Media
Roll Hanger